Initializing...
Preview
W2420025

W2420025

ASRaymond’s SPEC® Wave Spring Washers provide a thrust load and absorb vibration in applications with very limited axial space. Stamped from flat-rolled steel sheets, these pre-engineered Wave Spring Washers are stamped complete, or wound on edge, with a small gap of overlap of the strip.
Typical applications for Wave Springs are in rotating mechanisms. They eliminate 'play' (or excessive space) on bearings supporting a shaft. Wave Spring Washers also accommodate thermal expansion and contraction without introducing play in the design. Applications include pre-loading bearings to prevent slop or backlash in assemblies. Motors, gearboxes or speed-reducers, and connectors are all examples of typical devices that use Wave Spring Washers in this way. They are available in both carbon and stainless steel and are supplied with a plain finish. A common application for Overlap Wave Spring Washers is placement adjacent to smaller bearings, where shaft take-up or thermal expansion and contraction accommodation is required. They are available in stainless steel and carbon steel.
Minimum quantity: 4

Diagram / specifications section

Preview
FHFree Height (in)0.168
IDInside Diameter (in)1.872
P1Load at H1 (lbf)45
H1Loaded Height (in)0.082
ODOutside Diameter (in)2.42
tThickness (in)0.025

Item specifications

  • [ItemMaterialType]Carbon Steel
  • Corrossion Resistance RatingBasic
  • Material1070-1095 Strip
  • Material Chemistry/DimensionalASTM A684
  • Max. Operating Temperature (F)250
  • Min. Operating Temperature (F)-40
  • Performance RatingBetter
  • Robustness RatingMedium
  • Weight (lb)0.01312

Similar items

W2420025S
W2420025S
W2420025S
F2022019
F2022019
F2022019
W2028022
W2028022
W2028022
W2645028
W2645028
W2645028