Initializing...
Preview
W0183004S

W0183004S

ASRaymond’s SPEC® Wave Spring Washers provide a thrust load and absorb vibration in applications with very limited axial space. Stamped from flat-rolled steel sheets, these pre-engineered Wave Spring Washers are stamped complete, or wound on edge, with a small gap of overlap of the strip.
Typical applications for Wave Springs are in rotating mechanisms. They eliminate 'play' (or excessive space) on bearings supporting a shaft. Wave Spring Washers also accommodate thermal expansion and contraction without introducing play in the design. Applications include pre-loading bearings to prevent slop or backlash in assemblies. Motors, gearboxes or speed-reducers, and connectors are all examples of typical devices that use Wave Spring Washers in this way. They are available in both carbon and stainless steel and are supplied with a plain finish. A common application for Overlap Wave Spring Washers is placement adjacent to smaller bearings, where shaft take-up or thermal expansion and contraction accommodation is required. They are available in stainless steel and carbon steel.
Minimum quantity: 4

Diagram / specifications section

Preview
FHFree Height (in)0.023
IDInside Diameter (in)0.134
P1Load at H1 (lbf)0.4
H1Loaded Height (in)0.012
ODOutside Diameter (in)0.183
tThickness (in)0.0035

Item specifications

  • [ItemMaterialType]Stainless Steel
  • Corrossion Resistance RatingBest
  • MaterialType 302 Strip
  • Material Chemistry/DimensionalAMS 5906
  • Max. Operating Temperature (F)600
  • Min. Operating Temperature (F)-320
  • Performance RatingBetter
  • Robustness RatingMedium
  • Weight (lb)0.00001

Similar items

B0281015S
B0281015S
B0281015S
B0250009S
B0250009S
B0250009S
B0187010S
B0187010S
B0187010S
B0250013S
B0250013S
B0250013S