Clip Nuts
Clip Nuts with High Strength Nuts
Our stock clips feature the ability to adapt to panel materials such
as metal, plastic and other materials. These clips have a self centering
tab which holds the clip in place during assembly and disassembly.
Clips
Clips provide a self aligning feature through the use of a spring tab.
The minimum panel hole diameter (H), as specified in the table, is required
for proper installation.
Nuts
All nuts are self locking per MIL-N-25027 with dry film lubricant except
part number S10725-281 which is a free running nut without lubricant.
Thread sizes are specifried in the part tables. Maximum torque values
should not be exceeded.
Panel Thickness
The panel thickness is specified as a range for each part. Example:
For part number S08125-250 the clip can receive a panel from 0.020" (0.51mm)
thick to 0.125" (3.18mm) thick.
Hole Position
The center of the hole dimension is the maximum distance that the center
of the hole can be from the edge of the panel. The hole can be placed
closer to the edge, however the clip will protrude.
Material
Clip and Nut made from High Carbon Steel - heat treated to provide
optimum performance.
Finish
Clip and Nut plated with Cadimum or Zinc with supplemental chromate
treatment.
Maximum Torque
| |
|
4-40 |
17 |
1921 |
6-32 |
26 |
2938 |
8-32 |
34 |
3842 |
10-32 |
51 |
5763 |
1/4-20 |
85 |
9605 |
* Torque out of the nut from the
clip. |
|
