Multiwave Compression Springs

Part Number	CAD	Dh (mm)	Dr (mm)	t (mm)	L0 (mm)	L1 (mm)	N (N)	R (N/mm)	Qty
MW0375015004S		9.5	6.4	0.2	3.8	1.58	17.8	7.9	Add
MW0375025004S		9.5	6.4	0.2	6.4	2.74	17.8	4.9	Add
MW0375035004S		9.5	6.4	0.2	8.9	3.81	17.8	3.5	Add
MW0375045004S		9.5	6.4	0.2	11.4	4.95	17.8	2.8	Add
MW0375015007S		9.5	6.4	0.3	3.8	2.06	31.1	17.7	Add
MW0375025007S		9.5	6.4	0.3	6.4	3.68	31.1	11.7	Add
MW0375035007S		9.5	6.4	0.3	8.9	5.13	31.1	8.2	Add
MW0375045007S		9.5	6.4	0.3	11.4	6.66	31.1	6.5	Add
MW0437016504S		11.1	7.1	0.2	4.2	1.60	17.8	6.8	Add
MW0437027504S		11.1	7.1	0.2	7.0	2.77	17.8	4.2	Add
MW0437038504S		11.1	7.1	0.2	9.8	4.06	17.8	3.2	Add
MW0437016508S		11.1	7.1	0.3	4.2	2.08	35.6	16.8	Add
MW0437027508S		11.1	7.1	0.3	7.0	3.61	35.6	10.5	Add
MW0437038508S		11.1	7.1	0.3	9.8	5.03	35.6	7.5	Add
MW0500018005S		12.7	7.9	0.2	4.6	1.58	22.2	7.4	Add
MW0500030005S		12.7	7.9	0.2	7.6	2.72	22.2	4.6	Add
MW0500042005S		12.7	7.9	0.2	10.7	3.81	22.2	3.3	Add
MW0500018010S		12.7	7.9	0.3	4.6	1.65	44.5	15.2	Add
MW0500030010S		12.7	7.9	0.3	7.6	2.90	44.5	9.5	Add
MW0500042010S		12.7	7.9	0.3	10.7	4.12	44.5	6.8	Add

MULTIWAVE COMPRESSION SPRINGS

Multiwave springs replace conventional round wire springs when space is critical; they will occupy only 1/3 to 1/2 of the compressed height space of a traditional round wire spring, while providing more deflection with the same load specifications.

SPEC Multiwave springs should be used for all applications requiring tight load deflection specifications where axial space is critical.

Unique manufacturing where a single filament of round edged, pre-tempered flat wire is used to form the springs from a continuous coil. This results in uniform diameters and wave heights.

MATERIAL

Stainless steel commercial type 17-7 PH (slightly magnetic).

Maximum application temperature is 650ºF (340ºC)

FINISH

Plain finish is standard

Back to site top ↑